TASCAM M2600 MKII 24-Ch Recording Console (w/ power supply in Spartanburg, SC

TASCAM M2600 MKII 24-Ch Recording Console (w/ power supply)

Designed for the personal and project recording studio, the TASCAM M-2600 MKII Recording Console takes the best of the original M-2600 and packs in additional features that users asked for. Things like balanced tape ins and outs, a high-intensity meter bridge, switchable +4 and -10dB levels and insert automation capability.Of course, the console utilizes TASCAM's latest re-engineered, premium quality mic pre-amps, has even greater headroom as a result of a new and improved power supply, advanced-design split EQ, and significantly improved talkback and in-place solo capabilities.But what's really most important to the personal and project studio owner is that this unit is truly optimized for recording: It includes dozens of application-specific features that make recording and mixing quicker and easier than ever before. Things like a true 8-bus design, group/direct out switching on every channel (which eliminates time-consuming repatching) two independent stereo mix cues while tracking, six independent AUX sends, six assignable stereo returns, "flip" signal assignment and much more.Built into every M-2600 MKII is the most flexible EQ routing system available, the kind you normally find on consoles costing up to three times as much. In simple terms, it gives you the capability of using the shelving and semi-parametric EQs anywhere you want - either in monitor or channel paths. The dual sweepable mid band EQ on each channel lets you apply 16dB of boost or cut at critical frequencies, along with high frequency shelving at 12kHz and low frequency at 80Hz.Another feature TASCAM didn't compromise on when designing this mixer is the AUX sends: You get six of them - two stereo and four mono, all totally independent and individually assignable and all available simultaneously. They can be used for monitor or signal and Returns are routed through any of six stereo paths which allows you to set two independent stereo cue mixes (i.e. one for control room and one for studio). In the Control Room section there's a dedicated master level for the SOLO function and an indicator light so you can quickly see if any SOLO switches are activated.I have used this board with an M-Audio Delta 1010 PCI digital audio interface in the past with GREAT results. This board rocks!(A meter bridge is NOT included, but if you do a little digging you could probably find one on the 'net. I did not, however, find it necessary with the way I used this console.)

Contact Seller:
By clicking here you have given permission for Showme to transmit you information to seller/partner and for Showme and/or seller/partner to contact you.